1517 Kelley Ave.

Kissimmee, Florida 34744 USA

(We have moved, please note our new address & phone numbers)

ph: 407-933-0222 / fx: 407-846-9011
Toll Free: 877-957-1600

Manufacturer of Custom Communications for 2-Way Radios, Vehicular Repeaters, Ear Microphones, Headsets, Special Applications and Communications for Racing.
Serving the two-way communications industry since 1986, Panther Electronics is a world-wide manufacturer and provider of custom communications applications, including repeaters and vehicular repeaters, auto and boat racing communications, aviation, emergency and railroad communications, intercoms and weather stations. Consulting services also available

 


The EAR2001-PRRE Portable Radio Range EXTENDER operates in conjunction with two Mobile Units that operate independant of each other during Repeater Disable Operations mode. Enabling the EAR2001-PRRE allows transmissions heard on Mobile Radio #1 to be re-transmitted to a Portable Radio from Mobile #2. A reply from the Hand-held Portable is received on Mobile #2 and re-transmitted into the system on Mobile #1 since two communications paths exist to and from the Portable Radio through the Mobile Units located nearby.

It is only necessary for the low powered hand held radio to communicate with these units to send and receive two way communications to distant REPEATERS, MOBILES, or BASE STATIONS.


EAR2001-PRRE Portable Radio Range Extender

Other Panther Electronics products:
Panther C.A.T. System
EAR2001-TRA Transportable 2-Way Radio
EAR2001-HS Hatset Communicator
EAR2001-AHS Aviation Hatset Communicator
EAR2001-HC Helmet Communicator
EAR2001-SEM Stealth Ear Microphone
ICOM R2 Communications Receiver
PAN RAK2001 Panther rack-mount Communications Repeater

PORTABLE CROSS-BAND REPEATER SYSTEM <<< New Items for...
PORTABLE COMMAND POST SYSTEM <<<
PORTABLE IN-BAND REPEATER SYSTEM <<< High Rise Building Communications

Literature & Testimonials

*** Panther Products Literature in Adobe format (Adobe Reader also available) ***

Home Page



OPERATION:

A call is made from a mobile through the UHF repeater on frequency R1, T2. This signal is heard by the mobile receiver on frequency R2 activating frequency T3 in the VHF mobile unit through 1/2 of the DUAL CONTROLLER EAR2001-PRRE. The signal is then received at the VHF portable radio on frequency R3. A response from the VHF portable is transmitted on frequency T3. This signal is received at the VHF mobile unit on frequency R3 which activates the UHF mobile on frequency T1 through the other half of the dual controller EAR2001-PRRE and is heard at the UHF repeater's receiver which is operating on frequency R1. This activates the UHF repeater transmitter on frequency T2 which re-transmits the response to the originating mobile unit.

NOTE: THE VHF PORTABLE AND MOBILE COULD BE OPERATED IN BAND WITH THE UHF MOBILE IF ADEQUATE UHF FREQUENCY SEPARATION CAN BE MAINTAINED.


For more information contact: Panther Electronics

Click here to visit our other WebSite



©Design by: radiodata
Last update: 7/16/2004